HC90U

HC90U is cold chamber die casting machine of parting injection method.
Of air entrainment is less by parting injection mechanism, because the hot water flow is flowing along the parting line is excellent in castability, and leads to the improvement of the yield, can be cast in the ultra-thin products and ultra-precision parts.
Also can be arbitrarily set the mold opening stroke, and is compatible with high cycle casting.

Features of HC90U

The yield improved by parting injection system.

Injection twin circuit enable to stable casting

Injection position change mechanism (0～70㎜)

　

▶ Parting injection
Molten metal direct inject to cavity smoothly from parting line runner, so compare with traditional cold chamber die casting machine it have much better metal flow. It is suitable to produce the ultra-thin and precision product.

▶ Extrusion mechanism
Adopt a hollow cylinder rod to the hydraulic extrusion mechanism. Easily available in the extrusion plate connecting bolt.

▶ Injection twin circuit
Adopt an injection twin circuit, high-speed circuit and the pressure increasing circuit is independent structure. Is not the pressure increasing cylinder affect the high speed cylinder, can be stably have cast.

▶ Injection position switch
Can be set the injection position in the range of 0 ~ 70mm. The realization of the ideal of mold layout.

Technical Data

Locking force	1000kN
pace between tie bars	390×390mm
Die stroke	250mm（Variable）
aximum Injection force	82kN
Injection force	32.7kN (φ63)
Injection stroke	200㎜

 

The above specifications may vary depending on the model.
Please note that the above specifications are subject to change without notice.