CX50F3
Features of CX50F3
Duel circuit for totally independent control of injection pressure and die locking pressure
Sturdily die locking and injection mechanism
High cycle mechanism
F2 Series Features
Adopt a non-contact proximity switch for 2 steps changing mechanism for injection slow/fast that is resulted in long life
Standard equipped sequencer control system and 8 inch liquid crystal color display touch panel
Corresponds to many languages;Japanese,English,Chinese,Korean and Thai(Option setting)
STANDARD
| ▶Equipped with limit switch | ▶Can be constantly temperature management monitoring |
|---|---|
 Standard equipped external limit switch with injection cylinder. It made possible easily adjustment the change over position for injection slow/fast |
 Illustration panel on the control box allows all management information for the temperature of furnace and heaters |
| ▶Can be set to various casting conditions | ▶Monitoring the output of the hydraulic valve |
|---|---|
 Storage the various kinds of casting condition up to 20 type dies. Needless to resetting the casting condition every time die changing |
 Monitoring the output of hydraulic valve and each limit switch |
| ▶Individually manage the injection parts | ▶The store alarm uptime |
|---|---|
 Shot counter allows the management of injection parts individually and draws the accurate information of exchange date |
 Storage and indicates alarm records and operation hours of machine and equipment |
OPTION
| ▶Injection waveform display | ▶Fully automatic water heater |
|---|---|
 Assist the operator in obtaining the optimum setting of injection plunger position, injection speed and pressure |
 The display of die locking force allows easy adjustment of die height. And it relates to the interlock function for injection |
Technical Data
| Die locking force | kN | 500 |
| Space between tie bars | mm | 302×326 |
| Die stroke | mm | 215 |
| Die height | mm | 170~340 |
| Maximum Injection force | KN | 52 |
| Injection stroke | mm | 130 |
| Injection position | mm | 0/-65 |
| Ejector force | KN | 39 |
| Ejector stroke | mm | 70 |
| Nozzle touch force | KN | 44 |
| Nozzle touch stroke | mm | 175 |
| Injection plunger diameter | mm | 50 |
| Casting pressure | MPa | 26.4 |
| Casting area (efficiency 100%) | cm2 | 189 |
| Maximum shot weight (efficiency 75%) | kg | 1.30 |
| Dry cycle time | sec | 3.0 |
| Working pressure | MPa | 10.5 |
| Oil tank capacity | L | 195 |
| Melting pot capacity | kg | 300 |
| Electric motor capacity | kw | 7.5 |
| Power supply capacity | KVA | 12 |
| Output of electric furnace | kw | 31.5 |
| Machine weight | ton | 3.8 |
The above specifications may vary depending on the model.
Please note that the above specifications are subject to change without notice.