CXMG 600

CXMG600

Features of CXMG600

More space available between the pull-back bar and ejection panel due to the new design, which allows the link housing to hold the guide bars in place.

The largest space between tie bars up to 710 x 710mm and has a large die stroke of up to 644mm. The largest die locking unit in its class.

Speed of die locking, ejection, core puller can be controlled by touch panel.


CXMG Series Features

Advanced magnesium hot chamber die casting machines serialization.

Excellent stability and durability which enabled prolonged high cycle casting continuously.

Standard equipped multi-language touch panel and piston type accumulator.

Maximum injection speed realized 6m/sec by dry shot.

 

STANDARD

▶ High-speed injection equipment ▶ Nozzle touch cylinder
CXMG_Series
Logic valve and piston type accumulator on the higher speed injector enable constant injection and product quality.
Maximum injection speed 6m/sec by dry shot achieved.
CXMG_Series
By shifting the nozzle touch cylinder at the operation side and helper side, it improved the maintenance works around injection nozzle.
▶ Withdrawal ShikiToru flash furnace ▶ Multilingual touch panel display
CXMG_Series
Drawer type melting furnace, it makes heating element exchange work be easy.
CXMG_Series
Standard equipped multi ‒ language TFT touch-panel display.
(Japanese, English, Chinese, Korean, Thai)

OPTION

▶ Injection waveform monitoring device ▶ Clamping force display
CXMG_Series
Displays injection wave(position, speed and pressure), and grasp of relevant casting conditions.
CXMG_Series
Displays the die locking force digitally.
When die locking force was except a rated value, the safety circuit works to stop the injection.
▶ Nozzle heater ▶ Gooseneck heater
CXMG_Series
Improves working environment by heating a nozzle equally, and it makes stable casting.
CXMG_Series
Since a gooseneck is heated with a heater, it contributestoimprovementinwork environment and prevents gas entering into a furnace, also leads to reduction of an oxide.

▶ Hydraulic jack-up system ▶ Motor drive safety door
CXMG_Series
The central hydraulic jack up system allows easy injection position changing.
CXMG_Series
The motor-drive safety door reduces the failure rate of long duration operations and shorten the door opening / closing time.
▶ Sub-plate
CXMG_Series
By attaching the exchangeable steel plate to platen, it is reduction of the maintenance cost.


Peripheral equipment

▶ Hydraulic automatic clamp ▶Ingot preheating automatic insertion equipment
PERIPHERAL EQUIPMENT
Hydraulic mold clamping, it can easy to mold exchange
safely in a short time.
PERIPHERAL EQUIPMENT
The preheated ingot is supplied automatically, it can easy to control the metal level.
▶ Mold temperature controller
PERIPHERAL EQUIPMENT
Management of mold temperature is indispensable to mass production of high precision products.


 

Technical Data

Die locking force kN 6000
Space between tie bars mm 710×710
Die stroke mm 644
Die height mm 350~800
Injection force KN 208
Injection stroke mm 230
Injection position mm 0/-160
Ejection force KN 285
Ejector stroke mm 160
Nozzle touch force KN 70
Nozzle touch stroke mm 550
Injection plunger diameter mm Φ80/90/100
Casting pressure MPa 41/32/26
Casting area (efficiency 100%) cm2 1463/1875/2307
Maximum shot weight (efficiency 75%) kg 1.56/1.97/2.44
Dry cycle time sec 9
Working pressure MPa 14
Oil tank capacity L 700
Melting pot capacity kg 870
Electric motor capacity kw 37
Power supply capacity KVA 62
Output of electric furnace kw 112
Machine weight ton 28

The above specifications may vary depending on the model.
Please note that the above specifications are subject to change without notice.