Feature of machine

●Standard equipped with PLC control system and LCD touch panel.
●Corresponds to many languages such as Japan, the English, Chinese, Korean, Thai etc.
●Possible to manage temperature and injection condition through touch panel
●Space between tie bars is 330x330mm. This space is wider than conventional machines. Possible to install bigger size mold

Temperature control
Possible to set each heater temperature and alarm Equipped with temperature graph function.
Safety cover
New design focused on functionality and safety. Improved workability by ensuring the space.
Injection mechanism
Enhance performance and stability by logic valve. Easy to setting injection speed exchange by limit switch

Die locking mechanism
Due to stress analysis and years of accumulated know-how, A high precision, high rigidity, long-life mold clamping device is realized.
Furnace with pull-out function
Easy to change the heater by pull-out the furnace Realize the stable temperature control and clean working environment.

Technical Data

Die locking force kN 500
Space between tie bars mm 330×330
Die stroke mm 215
Die height mm 170~340
Injection force KN 52
Injection stroke mm 130
Injection position mm 0/-65
Ejector force KN 39
Ejector stroke mm 70
Nozzle touch force KN 44
Nozzle touch stroke mm 175
Injection plunger diameter mm 50
Casting pressure MPa 26.8
Casting area (efficiency 100%) cm2 186
Maximum shot weight (efficiency 75%) kg 1.3
Dry cycle time sec 3
Working pressure MPa 10.5
Oil tank capacity L 235
Melting pot capacity kg 270
Electric motor capacity kw 7.5
Power supply capacity KVA 12
Output of electric furnace kw 31.2
Machine weight ton 3.8

The above specifications may vary depending on the model.
Please understand that the above specifications may be changed without notice.